McCallum Heavy Duty Aluminium Fast-Fix Hinge
A104
Includes: 1x Hinge w/ screws
Application:
- Suitable for aluminium entrance doors in high usage situations.
- Suitable for either centre pocket or front edge glazing systems.
- Suitable for some timber door applications. Pre-drilling of the holes in the timber may be required.
- The A104WF will be more suitable for Timber Doors because the fixing holes on the wings are approx. 13mm away from the edge of the door.
Specifications:
- Alloy: High strength T.6 minimum tensile 254 mpa.
- Pin Diameter: 6mm stainless steel with machined chamfer both ends.
- Bushes: Flanged nylon.
- Knuckle: Squareline – Heavy duty.
- Aluminium Endcaps: Pressed-in interference fit.
- Dimensions: A – 130mm, B – 65mm, C – 39mm, D – 26mm, E – 18mm, F – 3.3mm(Please refer to images for dimensions.)
Installation Guide Only:
Door Thickness: Minimum 40mm.
When using a door closer, we recommend a minimum of 3 hinges be used, with the top hinge located as high
as possible. For excessive usage a fourth hinge may be required.
Standard Door: 2040 high x 820 wide x 100 kgs3 hinges.
Oversize Door: 4 to 5 hinges.
The wing locator allows for fast fixing.
Fixing
Fastening screws supplied.
Two directional.
Pop rivets are not recommended.
